Hardwood floor refinishing for New Jersey homes.
The floors under that worn finish are often in better shape than they look. Our hardwood floor refinishing NJ crew repairs damaged boards, sands down to fresh wood, stains it the color you want and seals it for years of use.
Hardwood floor refinishing NJ homeowners are often surprised by.
A lot of New Jersey homes are sitting on solid hardwood that's been hidden under carpet or worn gray by decades of foot traffic. Before you replace it, it's worth knowing that solid wood can usually be sanded and refinished, and the result often looks better than new flooring would.
We start by looking at what you have: how thick the wear layer is, whether there's water damage, pet stains or boards that need replacing, and how the floors connect between rooms. Damaged boards get cut out and woven in, then the floor is sanded down to clean wood.
From there it's your call on color, from a natural clear finish to a darker stain, followed by protective coats of finish. It's one of the fastest ways to change how a house feels, and it pairs well with fresh paint and trim if you're refreshing a few rooms at once.
The National Wood Flooring Association has good homeowner guidance on how many times a floor can be sanded, and EPA's guidance on VOCs and indoor air explains why we ventilate while finishes cure. For hardwood floor refinishing, NJ homes built in the 1950s and 60s often hide solid oak under old carpet.
Refinishing, done carefully.
Check the wood
Wear layer, damage and past refinishes checked first.
Replace bad boards
Water-stained, cracked or pet-damaged boards cut out and woven in.
Back to bare wood
Old finish and surface wear sanded away, edges and corners included.
Your color
Natural, warm or dark, sampled on your floor before we commit.
Protective coats
Multiple coats of finish for durability.
Stairs & trim
Stair treads, nosing and shoe molding addressed with the floors.
Refinishing, step by step.
Five steps from scuffed and gray to warm and smooth.
- 01What's there
We look at the floors with you.
We check how much wood is left to sand, spot repairs, and talk about color and sheen. Free written estimate.
- Inspection
- Color ideas
- Free estimate
- 02Fix boards
Damaged boards replaced.
Problem boards get cut out and new ones woven in so the repair disappears once it's sanded and stained.
- Board repair
- Fastening
- Prep
- 03Fresh wood
Down to clean, bare wood.
The floor is sanded in passes, edges and corners included, until the old finish and surface wear are gone.
- Main floor
- Edges
- Dust control
- 04Color & coats
Color, then protection.
Your stain goes on, then coats of finish to protect it.
- Stain
- Finish coats
- Cure time
- 05Done
Trim back, rooms back.
Shoe molding goes back, we clean up and walk the floors with you, with care instructions for the first few weeks.
- Trim
- Clean-up
- Care tips
Floors we've brought back.
Real photos from Complete Design projects. More in the project gallery and on Instagram.
Signs your hardwood needs refinishing.
- The finish is worn through in walkways and in front of the sink
- Gray or dark spots where water has soaked in
- Scratches you can feel with a fingernail
- An orange or dated stain color
- Carpet came up and there's oak underneath
- Boards are sound, but the surface looks tired
Light refresh
For floors with worn finish but no deep damage.
Sand & stain
Back to bare wood with new color and finish.
Fix and blend
Damaged boards replaced, then sanded together.
When it's too far
If the wood can't be saved, we'll tell you.
Hardwood floor refinishing NJ towns we serve.
We refinish hardwood floors throughout Somerset County and the surrounding area, including plenty of older homes where the original oak is still waiting under carpet.
Hardwood refinishing questions.
Can my hardwood floors be refinished?
Most solid hardwood can be sanded and refinished, sometimes several times over its life. Engineered floors depend on the thickness of the top layer. We'll check during the walkthrough.
Can you change the color of my floors?
Yes. Once the floor is sanded to bare wood, it can take a new stain. We test colors on your floor so you can see them first.
Can you fix water-damaged boards?
Usually. Damaged boards are cut out and replaced, then sanded and finished with the rest of the floor so the repair blends in.
Do you offer free hardwood refinishing estimates in Warren, NJ?
Yes. We'll look at the floors and give you a free written estimate.