Restoration · Mold

Mold remediation that fixes the moisture behind it.

Mold grows where water has been. For mold remediation, NJ homeowners call us to remove the affected materials, deal with the leak or dampness that caused it, and rebuild the space so it stays dry.

ContainKeep it from spreading
RemoveAffected materials out
Fix moistureSo it doesn't return
Mold remediation NJ job: section of drywall with mold growth removed
Why mold keeps coming back

Mold remediation NJ: start with the water problem

Mold needs moisture to grow. A slow plumbing leak, a damp basement, a bathroom without enough ventilation or drywall that got wet and was never dried out properly can all give it what it needs. Cleaning the surface without fixing the moisture usually means it comes back.

Our mold remediation work focuses on both halves of the problem. We find the affected areas, remove moldy drywall, insulation, carpet and other porous materials that can't be cleaned, and address the leak, drainage problem or humidity that caused it. Then we rebuild with new materials.

The photo on this page is a real piece of drywall we removed during a remediation job. Mold like this often grows on the back side of walls, where you can't see it until the wall is opened.

The EPA’s guide to mold, moisture and your home and the EPA's page on mold cleanup in your home both make the same point we do: fix the moisture or the mold comes back. That's the core of our mold remediation NJ work.

Close-up of mold growth on removed drywall
Removed from inside a wall
Basement corner with damaged drywall cut away and floor stripped
Affected materials cut out
How we handle it

How we handle mold.

Careful, contained work, followed by a proper fix so the problem doesn't return.

01 · Inspect

Find affected areas

We look for visible growth, staining, odors and the moisture source behind it.

02 · Contain

Isolate the work area

The affected area is sectioned off to limit the spread of spores and dust to the rest of the house.

03 · Remove

Take out affected materials

Moldy drywall, insulation, carpet and other porous materials are removed and bagged.

04 · Clean

Treat remaining surfaces

Framing and other surfaces that stay are cleaned and treated.

05 · Fix

Stop the moisture

Leaks are repaired and drainage or ventilation problems addressed so it doesn't come back.

06 · Rebuild

Close it back up

New drywall, flooring, trim and paint by our remodeling crew.

What's included

Mold-related work we take on.

Mold is rarely just mold. Most mold remediation NJ jobs we see come with water damage or drainage problems, and we handle those in the same project.

  • Basement mold, finished or unfinished
  • Bathroom and laundry-room mold from leaks or humidity
  • Removal of affected drywall, insulation and carpet
  • Cleaning and treatment of framing
  • Repair of the leak or moisture source
  • Drywall replacement and finishing
  • Flooring, trim and interior painting
  • Related waterproofing and French drains
Then we rebuild

The repair is where it becomes an upgrade.

After remediation, the rebuilt room can be better than the one it replaced, with materials and ventilation chosen for a space that stays dry.

Because our remodeling crew does the rebuild, you're not handing the job to a second company halfway through. The person who saw the damage is the person who puts the room back together, and if you've been wanting a better layout, new floors or a fresh color, this is the moment to do it.

New lower drywall panels in a basement laundry area
New drywall after removal
Basement utility room with fresh taped drywall
Ready for paint
Keep it from happening again

Keep moisture, and mold, down.

01 · Humidity

Control basement humidity

A dehumidifier in a damp basement makes a real difference, especially in a humid New Jersey summer.

02 · Ventilate

Run the bath fan

Run bathroom exhaust fans during showers and for a while after.

03 · Leaks

Fix small leaks fast

A drip under a sink or a weeping supply line can feed mold for months before it's noticed.

04 · Dry out

Dry wet materials quickly

If something gets wet, dry it right away or remove it. Wet drywall and carpet shouldn't sit.

Where we work

Mold remediation near Warren and across New Jersey.

We're based in Warren, in Somerset County, and work in homes throughout Union, Morris, Middlesex, Hunterdon, Monmouth, Ocean and Hudson counties. Not sure we cover your town? Call and ask.

All service areas

Questions

Mold remediation FAQs

What causes mold in a house?

Moisture. Leaks, flooding, damp basements and poor ventilation give mold what it needs to grow. Fixing the moisture source is as important as removing the mold.

Can I just clean mold off the wall?

Small spots on hard, non-porous surfaces can sometimes be cleaned. Mold in drywall, insulation or carpet usually has to be removed, and the moisture causing it has to be fixed or it tends to return.

Do you repair the walls after mold removal?

Yes. Our remodeling crew installs new drywall, flooring, trim and paint after the affected materials are removed.

Is mold remediation connected to water damage?

Very often. Many mold jobs start with a leak, a flood or a damp basement, so we look at the water problem as part of the remediation.

What areas do you serve for mold remediation?

Warren and Somerset County, plus Union, Morris, Middlesex, Hunterdon, Monmouth, Ocean and Hudson counties.

Free estimate · No obligation

Let's draw up your project.

One bathroom or the whole house, it starts with a walkthrough. Tell us what you're picturing and we'll map out the plan, the timeline and the next step.

(732) 759-0765

Mon–Fri 8 AM – 7 PM · Sat–Sun 8 AM – 6 PM · Licensed & insured · NJ HIC #13VH09293400

Call Text Free Estimate